Summer is around the corner, so it’s time to get your AC running in top condition. Sometimes your air conditioning unit can refuse to turn on, which can be frustrating and uncomfortable, especially during hot weather. In this article, we’ll talk about four quick solutions to consider if your AC refuses to turn on, and if you’re in Chico, CA, or the surrounding areas, contact Climate & Energy Solutions for professional air conditioning repair.
Here Are Four Quick Solutions When Your Air Conditioning Unit Refuses To Turn On:
1. Check The Thermostat Settings
The first and most common solution is to check your thermostat settings. Ensure that the thermostat is set to “cool” mode and that the desired temperature is lower than the current room temperature. Sometimes the thermostat’s batteries may be dead or low, causing it to malfunction. If you have a programmable thermostat, check the settings to ensure the programmed schedule is correct.
2. Check The Air Filters
Dirty air filters can cause your AC unit to malfunction or not turn on. Dirty air filters restrict airflow, making it harder for your air conditioning unit to cool your home effectively. Over time, this can cause damage to your AC unit’s compressor and other critical components. Therefore, replacing your air filters regularly is essential, ideally every 30 days or as the manufacturer recommends. If your air filters are dirty, replace them, and see if your AC unit turns on.
3. Check The Circuit Breaker
Another possible reason why your AC unit may not turn on is a tripped circuit breaker. An AC unit requires a significant amount of electricity to operate, and if it’s pulling too much power or there’s a fault, it can trip the circuit breaker. Locate your home’s electrical panel and check if the breaker connected to your AC unit is tripped. If it is, reset it and see if your AC unit turns on. However, if the breaker trips again, you may have a more serious electrical problem, and you should contact our professional air conditioning repair technician.
4. Check The Condensate Drain Line
Your air conditioning unit produces condensation as it cools your home, which needs to be drained away. If the condensate drain line becomes clogged, the water will back up into your AC unit, causing it to shut down. This is a common issue in humid climates and should be checked regularly. Locate your AC unit’s condensate drain line and ensure it’s not clogged or blocked. If it is, clear the blockage and see if your AC unit turns on.
If you’ve tried these quick solutions and your AC unit still won’t turn on, it’s time to contact Climate & Energy Solutions. We’re here to help you with all your air conditioning repair needs. Our experienced technicians will diagnose the problem and provide a reliable and cost-effective solution to get your AC unit up and running quickly. Don’t suffer through the summer heat without a functioning air conditioning unit. Contact us today for professional air conditioning repair in Oroville, CA, and the surrounding areas.
